UA Sphere LX Modeling Microphone
Universal Audio

UA Sphere LX Modeling Microphone

Get the sounds of the greatest mics ever made.

The UA Sphere LX modeling microphone system gives you the sound of classic mics used by everyone from The Beatles and Beyoncé to Radiohead and Frank Sinatra, in a smaller, more affordable package.
Key Features
  • Record with 20 of the most sought-after microphones ever made
  • Change mic type, polar pattern, and other characteristics, even after tracking
  • Use Dual Mode for rich-sounding mic combinations on snare drums and guitar cabs
  • Add the ultimate modeling mic to your collection, with dual gold-sputtered diaphragms and the lowest noise of any mic in its class

  • Overview
  • Tech Specs

Grab the Keys to the Ultimate Mic Locker
Featuring 20 legendary mic models of Neumann, Telefunken, AKG, Sony, and more,* the Sphere LX gives your productions the most sought-after ribbon, condenser, and dynamic microphones ever made.

Find your Perfect Mic in Real Time with Apollo
The Sphere LX lets you audition classic mics before, during, and after recording with any interface, in any DAW. And when paired with an Apollo interface, you can do this with near-zero latency.

Use Dual Mode for Classic Mic Pairings
Blend the sound of two mono mics with Sphere LX's Dual Mode, and get rich-sounding mic combinations on snare drums and guitar cabs.

Reduce Room Sound for Better Recordings
Easily tame room coloration for cleaner, more professional recordings using IsoSphere and its expert presets tailored for everything from your bedroom studio to popular isolation filters from sE Reflexion Filters, Aston Halo, Kaotica Eyeball,* and more.

Built to Last a Lifetime
With dual gold-sputtered diaphragms and the lowest noise of any mic in its class, the Sphere LX outfits your studio with a premium, large-diaphragm condenser microphone, precision-built to deliver years of inspiration for your music, podcasts, and voiceovers.

Includes Everything you Need to Record
Right out of the box, the Sphere LX mic gives you a 10' cable, mic stand mount, and carrying case — so you'll be creating with the sound of legendary mics in no time.

Microphone Type Modeling Condenser
Polar Pattern Variable Dual Output
Frequency Range 20 Hz – 20 kHz
Sensitivity -39 dB (11 mV) ref 1V at 1 Pa, 1 kHz
Output Impedance 200 Ohms
Recommended Load Impedance > 1 K Ohms
Self-Noise 10 dBA
Signal-to-Noise Ratio 84 dB
Maximum SPL 145 dB SPL, 1% THD
Dynamic Range 135 dB
Capsule 1” Diameter Dual Diaphragm
Phantom Power Requirements 48 VDC, 5 mA typical
Connector 5-Pin XLRM
Adjustable Controls Pad: 10 dB, 20 dB
Included Accessories Mic Stand Mount, 10’ (3m) Cable, Carrying Case

Dimensions
  • 7.7" (195 mm) length
  • 2" (50 mm) diameter

Weight
  • 1.2 lbs (545 g)