sE Electronics
sE Electronics

sE Electronics sE7 Pair

Small-diaphragm Cardioid Condenser Mic with 80Hz Highpass Filter, Pad, and Gold-plated XLR
Product Highlights
  • For Drums, Guitars, Pianos & More
  • Cardioid Polar Pattern
  • Transformerless Circuitry
  • Selectable 20 dB Pad
  • Selectable Low-Cut Filter at 80 Hz
  • Handles SPL up to 156 dB
  • All-Metal Housing
  • Gold-Plated XLR Connector
  • Includes Mic Clip & Windscreen

  • Overview
  • Tech Specs

Designed for drums, guitars, pianos, or indeed, any application requiring a pencil-mic design, the sE Electronic sE7 Stereo Pair offers two back-electret, small-diaphragm condenser microphones. This is a matched pair suitable for stereo-miking drum overheads and other instruments. Each mic sports a cardioid polar pattern. Fashioned from class-A circuitry and utilizing a transformerless output, each microphone captures sound with clarity and neutrality across its frequency response, thus eschewing overly harsh highs and aiding in a pleasurable bottom end.

A switchable 20 dB attenuation pad in each mic allows you to use the pair with loud instruments, doing so with a favorable signal-to-noise ratio. Engaging the 80 Hz low-cut filter helps reduce rumble and other unwanted bass issues. Thus, you can use the mics in both close and distant miking scenarios.

An all-metal chassis in each microphone provides a robust, roadworthy construction, while gold-plated XLR terminations ensure security in the connecting process. Mic clips and windscreens are included.

Capsule Type 1/2“ back-electret condenser capsule
Polar Pattern Cardioid
Frequency range 20 Hz - 20 kHz
Sensitivity 19 mV/Pa (-34.5 dBV)
Max SPL 136 / 156 dBSPL (0/20 dB Attenuation pad)
Equivalent noise level 16 dB(A)
Dynamic range 120 / 140 dB (0/20 dB Attenuation pad)
Signal to Noise Ratio 78 dB
Low-cut filter: 80 Hz, 6 dB/Oct, switchable
-20 dB
Attenuation Pad 20 dB, switchable
Powering 48 Volts according to IEC 61938
Electrical Impedance <200 Ohms
Recommended load impedance >1k Ohms
Current consumption 3.0 mA
Connectivity 3-pin male XLR connector

Dimensions
  • Diameter: 23mm (0.91 in)
  • Length 120mm (4.72 in)

Weight
  • 128 g (4.52 oz.)