sE Electronics sE4400a Pair
Matched Pair of Multi-pattern Large-diaphragm Condenser Microphones with Shockmounts, Stereo Mounting Bar, and Flight Case
Product Highlights
- Multi-Pattern Selectable
- Two Low-Frequency Roll-Off
- Flat Profile
- -10 dB and -20 dB Pad Switch
- Includes Shock Mount
- Overview
- Tech Specs
The 4400a Large Diaphragm Microphone from sE Electronics is a microphone with 4 selectable polar patterns and 2 switchable low-frequency roll-off switches. The capsule features two capsules that provide omnidirectional, cardioid, supercardioid, and figure-8 polar patterns.
There are two selectable pad switches to maximize headroom and minimize distortion noise from transient (peak) audio signals. The 4400a features a flat, rounded-edge design that makes it great for mounting in kick drums, on percussion and drum heads.
| Capsule Type | Hand-Crafted True Condenser |
| Diaphragm | 32mm Twin Gold/Mylar |
| Directional Pattern | Cardioid, Hyper Cardioid, Omni |
| Frequency range | 20 Hz - 20 kHz |
| Impedance | 50 Ohms |
| Sensitivity | 25.12 mV/Pa (-32 dB) |
| Max SPL | 122/132/142 dB (0/-10/-20 dB pad) (0.5% THD @ 1kHz) |
| Signal to Noise Ratio | 78 dB |
| Self Noise | 16 dB(A) |
| Pass Filter Switch | 60/120 Hz |
| Preattenuation Pad | -10/-20 dB |
| Matching Connectors | XLR3F |
| Power requirement | 48V phantom |
Weight
- 280g / 9.88oz
