The BirdDog Mini HDMI to NDI Encoder is a tiny NDI interface for HDMI video sources. Connect your camera or other video source, and have it instantly be available on your NDI-enabled network. Despite its size, the BirdDog Mini supports 1080p resolutions up to 59.94 fps. PoE is accepted, so the Mini can be powered via network connection; no power supply needed. Tally information is displayed and passed through to compatible equipment. The small size of the Mini will make it at home in studios and video production facilities utilizing NDI technology.

Pure NDI

Mini is the World’s smallest NDI encoder. Full bit-rate NDI encoding with no compromises.

1080P60

With support for all resolutions from SD right through to 1080p and frame rates up to 60p, Mini is designed for maximum flexibility.

Tally

Mini makes Tally easy. Zero configuration, built-in Tally display, selectable Tally borders on loop out, and an external Tally output.

Flexible Power

Mini can be powered by Power over Ethernet (PoE) or D-Tap from your camera battery. No need for a power adapter, although there is one available should you you need it.

COMMS

Native support for the best and most intuitive Audio Intercom system on the planet; BirdDog Comms.

Link

Mini supports BirdDog Link. Encode from any BirdDog Studio NDI or Mini and play out to a TV or monitor.

Video Formats	HD) 1080p 23.98, 25, 29.97, 50, 59.94 (HD) 1080i 25, 29.97 (HD) 720p 50, 59.94
Video Input	1 x HDMI Standard Type A connector HDMI v1.4a, RGB or YCbCr
Video Output	1 x HDMI Standard Type A connector HDMI v1.4a, RGB or YCbCr
Audio Digital	2-Channel, 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous
Audio Analog	3.5mm Microphone headset input / output
Video Codec Support	Realtime, ultra-low latency, full-bitrate NDI (i-frame)
Display	Bicolor Tally (Red/Green) Multicolour status information Full status information on HDMI output (Selectable)
Network Interface	10/100/1000 Ethernet (RJ-45) with PoE (Power over Ethernet) Embedded web configuration panel for control and firmware updates
User Interface Controls	Network settings Video settings Tally settings Audio and Comms settings